Setup/Configure 3 Dell PowerEdge R820 Servers + NVR

Orlando FL

Description

Busy IT Provider Need Some Help with Overflow Work Perform the following straightforward tasks (for knowledgeable IT Engineer): All three systems are Dell PowerEdge R820 (16 drive model) with 4 x 10-core CPUs and 512GB RAM each. EACH of the 3 systems will have the following actions performed. 1. Mount rails to server and install in server rack 2. Connect with cables to KVM switch 3. Swap 4x1Gb RJ45 daughterboard for 2x1Gb RJ45 / 2x10Gb SFP+ daughterboard 4. Remove 4 x drive carriers containing 900Gb SAS drive for spares 5. Mount 4 x 2TB SSD drives into new carriers and insert where drives were removed from step 2 above 6. Setup hardware RAID using Dell's H710 Perc sets as follows: 6a. Set 0: 2 drives: 900Gb SAS: RAID 1 6b. Set 1: 4 drives: 2Tb SSD: RAID 5 6c: Set 2: 5 drives: 900Gb SAS: RAID 5 6d: Set 3: 5 drives: 900Gb SAS: RAID 5 7. Format and install Windows Server 2019 Datacenter (Desktop) on RaidSet0 8. Format RaidSet1, RaidSet2, RaidSet4 with NTFS 9. Install Hyper-V role with given parameters 10. Preload ISO folder on RaidSet0 with ISOs of 4 standard installers (W10, W11, S2019, AppsColl) 11. Function and load test server functions. Will be done onsite at one of our satellite offices. You will be expected to multi task; especially when RAID sets are building. In other words, while Server 1 RAIDs are building, switch to Server 2 via KVM switch and start those, then Server 3. 12. Replace Reolink NVR16 with newer model; switch over RJ45 cables from camera to new unit. (PnP) Pay is $25/hour via any standard eCash service at end of job (Zelle, Venmo, CashApp, PayPal)