Need carpenter to install 60 wood slats on porch ceiling, see diagram

King near Noel, Fremont CA

Description

Hello, My regular carpenter has done lots of wood work around the house, but unfortunately is unable to continue. So, I need someone to come finish off a project that he started. I have a porch that is roughly 6 feet wide by roundly 18-19 feet long. My carpenter sanded and stained 60 wood slats (strips) that are roughly half an inch thick, about 2.5 inches wide and about 9 feet long. These need to be installed on the stucco ceiling using generous amounts of industrial glue and nail gun (screws would also be acceptable, as long as the screw heads are nicely finished off). In the first picture and 2nd picture, i am showing you the ceiling. Remember, roughly 6 feet wide by about 19 feet long. In the second picture, you can see the wood slats, there are a total of 60 of them. In the fourth picture, i an showing the exact dimensions of the stucco roof. Look at the strips drawn in pencil. There should be a 1 inch gap between the strips. I will pay for nails/screws/putty and glue. You will provide a FIXED PRICE LABOR QUOTE to install. Remember that you have to cut around the 3 ceiling lights, and trim some of the slats to make them fit. Also, the ceiling is fairly even but not perfectly even, so some shaving may be needed. This project is NOT for a handyman, only for a carpenter. Unless you have a big pack of nail gun nails, you will have to go to Home Depot to get nails / screws / putty / glue. Fixed price quote only, please text it to us, do not call, please text quote.