Block Wall and Pavers Installation

11288 Duenda Rd. near Azucar Way, San Diego CA

Description

We have an embankment that is about 38' long. (see photo) We want to put in a block wall similar to what we have in our back yard (see photo). The wall will have a gentle curve to it, so may be closer to 40'. Height under 3'. So that's a total of about 120 square feet. We also have 3 small areas where we want to add pavers (Total 94 sq ft). We'll pay for all materials and have them delivered (block, pavers, cement (unless you want to bring that), glue (rather than pins), sand (unless you want to bring that). Speaking of sand, we also want you to re-sand the rest of our existing pavers (2300 sq ft). Most of this already has a very good layer of sand, but it's been a number of years, so some areas the sand has washed/worn away. We're just looking for EXPERIENCED people who can do the job, and who have availability to start and finish it in the next 2-3 weeks. If you do not have a LOT of experience building walls like this and/or installing pavers, please do not respond to this ad. Of course, for the wall, you will be pouring the concrete footer, putting in the french drain/aggregate and installing a short length of pipe under for us to run irrigation after the wall is done...as well as a mow strip/border. Let me know if you can quote based on the pictures and video (preferred) or if you would want to come by and look at it before quoting. We are getting a few quotes and looking for a competitive rate. Feel free to quote everything, or to only quote specific parts of the project. If you do quote everything, please break your quote down by project, for example: 1) The 120 square foot (40' long, 3' tall) wall would be $___ 2) The 30' border would be $___ 3) The 94 sq ft of pavers would be $___ 4) Re-sanding 2300 sq ft of pavers would be $___ Please check out the photos, but the video gives the best description of what we need done. You can find the video at