Web Camera / Security Camera Installer Needed

Houston TX

Description

Looking for an ongoing experienced technician for hire on a per project basis to run Cat5 or Cat6 network cable for IP cameras at various pet boarding facilities throughout Texas or Houston / San Antonio / Austin area. The ability to terminate cables with RJ45 connection ends is required. In many cases, cameras will need to be mounted as well - which can include indoor and/or outdoor locations. Here is a typical scope of work to be completed: - Run cabling to each of IP camera. Network cable must be run to code with proper strain relief and attention to detail for aesthetics. - Cables terminated with RJ45 connectors. - Cameras to be mounted using the provided mounting equipment. Outdoor cameras need to have weatherproofed connections and junction boxes where applicable. - Connect the Cat5e / Cat6 cable to the existing network router and cameras. - Cables need to be checked for continuity and verified. Cameras need to be connected into the network. - Cable will be provided. You will need the following tools/skills: - RJ45 Crimp Tool - RJ45 connection ends - Install tools such as a drill, hammers, etc... pretty basic You might have to drill some interior-holes through drywall to run cables. Most areas will be easily accessible. Please have experience installing security camera and web/ip camera systems. Pay for this job is $50-$75/hour depending on experience. If travel is necessary, it will be compensated. Email your experience and contact information for consideration.